Workgroup Bridge. PPT Enterprise Wireless LAN CIS 585 Stephen Choi Kevin Todd An access point in workgroup bridge mode can introduce a bridge loop if you connect its Ethernet port to your wired LAN If you want to configure a WGB to work with non-cisco APs, then you have to configure WGB as universal WGB (or uWGB)
Workgroup Bridge (WGB) basics first details later from www.netprojnetworks.com
The workgroup bridge provides wireless access connectivity to You can use following CLI under radio interface to configure it as universal WGB
Workgroup Bridge (WGB) basics first details later
The Cisco Wave 2 and 11AX APs as Workgroup Bridge recognizes the Ethernet clients only when the traffic has the bridging tag C9120# configure ssid-profile ssid authentication psk key-management wpa2 A workgroup bridge connects to a wired network over a single wireless segment by learning the MAC address of its wired clients on the Ethernet interface and reporting them to the lightweight access point using Internet Access Point Protocol (IAPP) messaging
Meru Networks AP150CB Indoor WiFi Workgroup Bridge. Note: The topology above illustrates a sample WorkGroup Bridge model WorkGroup Bridge Mode is recommended as an alternative when the Wireless Distribution System (WDS) feature is unavailable
PPT Enterprise Wireless LAN CIS 585 Stephen Choi Kevin Todd. A workgroup bridge is a networking device that extends the Wi-Fi network coverage by connecting a wired network to a wireless network --> In workgroup bridge mode, An Access Point associates to another access point as a client and provides a network connection for the devices that are connected to its Ethernet port.--> If your access point has two radios, either the 2.4-GHz radio or the 5-GHz radio can function in workgroup bridge mode.